So here we are ... Episode 150, and I am a little surprised that I made it this far into this Life of an Architect experiment, but due to the support and interest we have received over the last 6 years, we find ourselves as what I believe to be a fairly significant milestone. When it came time to pick today’s subject matter, there was really on one topic that was up for consideration … Welcome to EP 150: Drawing Stuff!

[Note: If you are reading this via email, click here to access the on-site audio player]

Today we are going to be talking about "drawing stuff", and if you are wondering what that really means, you are in the right place because that’s what Andrew and I are going to try and figure out. There are all sorts of examples and references in today's post so this is a good post to earmark for future reference (if you're into that sort of thing).

Life of an Architect and Drawing Stuff jump to 01:00

When I say “drawing stuff” to you, what comes to mind? Do you think there is some relevance to the fact that the question is framed because I said “drawing” and not “drafting”? I will confess that there is a difference for some, but not for me. I make drawings. I can draft them, I can sketch them, I can get on a computer and use software like Revit (well, I can’t use Revit), AutoCAD, or whatever your drafting software of choice might be. Drawing stuff can mean anything and in any software - I am just referring to visual communication and how we think and talk through ideas. I'd like to say that I don't think there is a wrong way to draw stuff - but we all know that's not true. Sketching, drafting, 3dmodeling, rendering, I've talked about all of it at one time or another but there are some particular moments that stand out for me ...

Notable Blog Posts for "Drawing Stuff"  08:47

https://www.lifeofanarchitect.com/do-architects-draw-too-much/

It wasn’t that long ago that I could produce construction drawings for a 6-figure residential project in little more than a dozen sheets of drawings. The last one I worked on was quite a bit more as the architectural set having around 45 sheets to it. That is a 400% increase within the last 20-years. Once I add in the structural drawings, grading and drainage drawings, as well as the dedicated HVAC drawings, we will approach 60+ sheets in this set.

What is going on? What is the reason for all the increased drawings? Is it the complexity of the projects? Maybe it’s because architects anticipate a contentious relationship with contractors? Maybe it’s the overly-specific design intentions that architects are wanting in our projects and we know that we can’t expect the contractor to read our minds?!? This entire post was a bit of a rant because things are starting to feel as if some residential contractors are punishing those of us that produce drawings that tell them how we want things done - that this makes us appear difficult and fussy when the exact opposite is the goal.

https://www.lifeofanarchitect.com/design-process-redlines/

I might not always be a nice person and I like to complain as much as the next person but if there is one trait someone who visits this site with any regularity knows, I do like to be helpful. During the design process, this typically manifests itself as “redlines”.  For those of you that may not be familiar, redlines are typically created when architects make editorial notes on a set of drawings to convey changes that are needed to be made. This process typically occurs during the construction drawings phase, but I find that they are more helpful for how I like to work during the design development phase of the projects.

Let’s take a look at some redlines I recently made (just click the picture about to be taken to a magical redline wonderland ...).

https://www.lifeofanarchitect.com/sketching-is-hard/

I suppose the point of this "Sketching is Hard" post is that sketching is hard for most people – it’s hard for me – and it’s okay if you end ...