Shawn walk’s through adding IO-Link devices to an IO-Link Master connected to a Rockwell Logix PAC using Studio 5000 in today’s episode of #AutomationTechTalk Lunchtime Edition livestream: Watch Automation Tech Talk on The Automation Blog:



Listen to Automation Tech Talk on The Automation Blog:

Automation Tech Talk Show Notes: Thanks for listening! If you’d like to join the show sometime, don’t hesitate to use the contact us link. Link mentioned in video:

– IFM AL1322 Webpage (includes AOI downloads)
– Shawn’s Online Courses
– Shawn’s In-Person Courses

Read the transcript on The Automation Blog: (automatically generated)

Shawn Tierney (Host): Hey everybody. Happy lunchtime. I hope everything is going great for you today. It is Friday, and I am pretty excited about that. Planning on spending a lot of time building more of these demos, this weekend.

I got all the stuff finally came in. So and then I’ll be sharing it with you over the next couple of weeks. Next week, I may have, more recorded content than live content. I’ll still try to release it at lunchtime, but, just some of the things I gotta do requires me to have, you know, to go through and do edits and whatnot. So in any case, though but I should be around almost all of next week, lunchtime, whether it’s recorded or live, I’ll be here.

But in any case, I just hope you all are having a great Friday. And today, we’re gonna do part two, and we’re gonna actually set up the two devices, the two IO Link devices. I thought this would be fun. Now if you guys are having any troubles hearing me or seeing me, please put it in the chat. Everything on my side looks like it’s working.

So, I’m just gonna go ahead and get started. Now I did play around with, some settings early this morning to see if I could get this to work. There we go. Okay. I I’m not a a huge fan of how they design everything, but, at least this is better than what we’re doing the other day.

In any case, we’re back in Studio 5000. And for anybody who didn’t catch yesterday’s show, what we did was we added these two. Let me see if I can switch over to those. We added nope. That’s not what I wanted to do, and that has to do with the selection.

You always have to select this. So let’s try it again. There we go. So we added these two devices to our ControlLogix, And we have one IO Link device here and one IO Link device here, but we already have the masters added to logic. So let’s go back here, and, yeah, I’ll click over here.

And now we’re inside logic, so you can see them right here down here. Make sure you guys are seeing what I’m seeing. And, now what we need to do is get the data in from the devices. We already have it coming in as, you know, just control the tags, but this is this is not, you know, what you would want. I mean, it’s it’s the twenty first century for crying out loud.

Right? We want our data, you know, to be more, massage than that. And, thankfully, the vendor, IFM, has some AOIs, and they’re in that same folder, that same download, the Allen Bradley download. They put all the AOIs in here, which I think is great. At first, I went to the actual pages for the different products, and there were no AOIs there.

And I’m like, I think they’re actually in the, the starter package for Allen Bradley. So I went into there. Again, we downloaded this yesterday. I talked about where to get this yesterday. There’s the add on instructions, IFM devices.

And the first device I have well, the device plugged into number, the first, IO MetLink master is, this was the RVP. So we’re looking for RXP. Okay. And so what we wanna do is bring in this. We have an eight port, so we need one that goes all the way up to eight ports.

And so what I’m gonna do is I’m gonna copy this path here. I’m gonna come over to our assets folder here, add on instructions. I’m gonna, input and add on instruction. I’m gonna give it the path open. We have eight port devices here, so I’m gonna use eight port, and that’ll bring it in.

I’m gonna accept all the defaults when it comes in. Bada bing, bada bang, bada bada boom. Excellent. Excellent. And now I know the other one I have is a temperature sensor, TN something.

So let’s see here. TN. K. A port, because that’s what I have in the field, eight ports. And bringing that out of instruction as well, except the defaults.

And on just a mere moments, they both come in now. You know, you probably know you can go to this add on, you know, toolbar here and bring them in that way. Although, did you know you can bring them in like this too? Right? Which is pretty cool because sometimes it’s easier to see it here because this text is really small.

Okay. So in any case, we have them in. Now let’s see if we can zoom in here now. We have to create tags for these. Okay.

So I’ll just do a new tag, and I’m just gonna call this these are the AL1322. I’ll call this a. Actually, this is actually for the device. So let me call this the RVP 510. I’ll just call it a in case we have another one in the future, and then, I’ll create it.

K. And I’ll do the same thing here. I might as well do that right now, and this is for our t n I think it’s a 2511 a. K. Boom.

So I got the backing tags for each of the add on instructions. Now I have to give it the PLC input. This one, you you know, it’s pretty obvious. Of course, we have I named thirteen twenty two a and b. Those are the two devices, the masters out there, but you have to grab the data.

K? You have to grab the data. I tried grabbing this when I was testing it early this morning. It’s like, oh, I don’t like that. I want the data.

K. So we’ll do that. That’s a, and then this guy is connected up to b. K. So we’ll go over to input data.

K. Port number. Now if we I don’t know if this thing will let me do this. Let’s try it like this. Okay.

Good. So let’s see this guy. K. This is the RVP he’s in. And this encoder, we’ve we’ve showed it in the show before.

We’ve we’ve had it on connected at, Allen Bradley and Siemens PLCs, but, we can see it’s, plugged into port one. K. This is the power port Ethernet in and out, and then this is an IoT port. And, again, we we’ve covered that in previous episodes. And then for the temperature sensor, I have it in Port 2.

K. So let’s see if we can get string yard to go back to this view here. Alright. Great. And now, so this guy is gonna be Port 1 because that’s the RVP, and this is gonna be Port 2.

This is, no nobody’s complaining that they can’t hear me, so that’s good. The vendor ID. So, let’s see. I do have the website up here, and let’s start with the temperature sensor. So this is IFM.

So the vendor ID is always going to be 310, and this particular device ID is 582. So this is a temperature sensor. So let me go back here, and it will go 310. And what is it? 582582.

And in the gradient listed in that if we search on gradient, we will see it’s point zero one. You guys see that? Yeah. Yeah, that’s on the screen. Okay.

So let’s go back over to the VMware point zero one. Beautiful. Okay. Now we gotta do this guy. Point number one.

Vendor ID, we know it’s gonna be 310 because it is still IFM. And then device ID. I have no idea what it is. So let’s go back to the IOD datasheet, and I think it’s at the very top. Just scroll up.

Yep. It wasn’t. Here we go. Device ID, 496. 496.

K. And then I’m gonna leave that all blank. Alright. So if we’ve done this correctly, this should massage that data and give us, you know, a counter, like, how many pulses per rev. I think this is defaulted to ten twenty four.

And then the temperature and for whatever reason, this is even though the unit’s set for Fahrenheit, this block is showing that it’s Celsius. I did not have a time to figure out why that was. I did look through the block to see if there’s any way I could toggle it in the block itself. There wasn’t. And so, let’s go ahead and download this bad boy and see if we get it to work.

Come on, puppy. Yeah. So all these limitations of StreamYard StreamYard is great for doing, interviews. Right? But, when it comes to doing things like this, I’m really struggling.

I may have to go back to, restream. Yep. Put the controller back into run mode. I’ve been using StreamYard for the for the interviews we’re doing the automation museum, which will come out Monday, but, the first episode anyways. We’re recording episode four this Sunday.

But, in any case so you can see it right here, and everything looks like it’s working. So let’s take a look here. I am going to turn you just have to trust me because I can’t do a split screen with this software. I’m gonna turn the encoder slowly, and we can see the counter turning up. Right?

And that is now represented by a tag, not just some random data tag, but it’s actually did these go as a program tags? K. Yeah. That’s, the add on instruction. That’s not what I wanted.

Nope. They’re controller tags. So here’s the RVP five ten. And we can see the count right there. See all the information about this.

Let’s leave it in this view. See if you guys can see that. K. And then the beautiful thing is, yeah, it’s in the data table. Right?

In the controller tags. Caught me there. Went a little legacy on you. You can see it here right on the block too, which is really nice. Right?

So it just takes that data, massages it, and, makes it look nice. And then on the temperature You know what? Something happened. How come my vendor ID didn’t get put in there? Because I I thought I pressed center.

Sometimes when you do it yeah. Look at it. Did I get that number wrong? That’s weird. You guys thought it was easy to live stream.

310582. I’m just joking. 310582. Yeah. Yeah.

Yeah. Port 2. You see this? I didn’t choose the right one. Typo.

You guys probably saw that when I did that too. K. Interesting. Interesting typo. Yeah.

So we have two different masses here. So we’re you know, it was right for us to get zeros here because there was nothing nothing attached to port two. So the feedback was zeros. And so that’s good. So if I woulda had another thing, I guess, I coulda done is I could actually have moved the, temperature controller over to the other master, and it should’ve worked.

Okay. So right now it says, 23. That’s Celsius. Of course, it’s probably well, we could just take a look here. 75 degrees in here and climbing, sadly.

Let’s see here. Oh, yeah. We’re going up. Not going up as fast as I was it went up earlier. Interesting.

Got up to 77. Now it’s falling because I let go of it. And, yeah, that was actually pretty easy to do. Just come out here and show you the devices one more time. So you could see this is what I was doing to turn the encoder, and, I was just holding on to this to get the temperature to go up.

Let me get that on there. Yeah. But, yeah, that was pretty easy to do. And so with that, I think that’ll wrap up wrap up today’s automation tech talk about IO Link. Did you guys catch the IO Link show from yesterday?

It came out a little later. It just been so crazy, but I did get that out, and I thought that was an excellent I actually sponsored it, so the video would be, ad free. I sponsored it myself. So I talk a little bit about, the automation school and whatnot. But in any case, just wanna, just remind you, Monday, we should have the episode of the automation museum.

It will not come out on LinkedIn. LinkedIn does not, want people to, have long format videos. So So they only they limit you to, like, a ten minute upload, and they don’t want your live streaming from long videos like that from, from a file. So, Monday, if you’re on LinkedIn, watch it on LinkedIn. That won’t be, the automation museum.

You’ll have to go to automation blog, or you’ll have to go to YouTube to see that. And then on, Tuesday through Friday, my hope is to have, some recorded content because I’m doing sponsored videos, more IO Link videos, more distributed IO. We’ll be doing Rockwell. We’ll be doing Siemens, and, all kinds of different, stuff. So, hopefully, you guys will enjoy those and learn something too because the whole purpose of this is to, you know, just share knowledge with you guys and hopefully make your you more efficient at your jobs and, you know, give you a reference you could share with somebody else in case they have the same questions.

You don’t have to go through the whole thing all over again. But with that, I wanna thank I haven’t even eat lunch yet. I gotta go eat lunch. But I wanna thank you all for tuning in today. I wanna wish you all a very happy Friday.

If you didn’t catch yesterday’s podcast on IO Link, please check it out. Michael did a great job. And, get some METTLEDO content coming up soon as well as, a bunch of podcasts were scheduled for podcasts out through Thanksgiving. So, we got some great content, and we’ve met with some great vendors. So I look forward to sharing that with you as well.

And with that, I’m just gonna wish you all good health and happiness. And until next time, my friends, peace.

If you have any questions about Shawn’s in-person or online courses, please don’t hesitate to setup a time to meet with Shawn via MSTeams, or drop him an email using his contact form here: https://theautomationschool.com/question/

Until next time, Peace ✌️ 

If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show.

Shawn M Tierney
Technology Enthusiast & Content Creator

Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.